How To Make Windows Xp Bootable Usb Pen Drive

How to Setup Windows XP from USB drive?

Y'all are here: Tutorials > How to setup Windows XP from USB drive?

Step1: Creating Rescue USB Drive

Commencement, we need create a rescue USB bulldoze which can boot the reckoner. Please follow the steps,

Run PowerISO rescue media utility. You lot can download it here. On Windows Vista or above operating organization, you may need confirm the UAC dialog to keep.
Insert the USB drive you intend to boot from.
The utility volition allow y'all cull Windows PE architecture and version. It is suggested to select 32-bit compages and Windows PE 3.xi. Click "Next" to continue.
Select USB drive for output device, and select the correct drive from the listing. Click "Next" to proceed.

The utility volition showtime creating rescue USB drive. It will check necessary component and automatically download missing component from the server.

Please detect that all existing information on the USB bulldoze will be destroyed during this step. The program will alarm you before writing the USB drive. Click "OK" to go along.

When it's washed, copy the Windows XP setup files to the USB drive. Please note that you'll only need the i386 folder.

If no errors occurred in the above process, you should now be all fix to setup Windows XP from USB bulldoze!

Step 2: Configuring the BIOS

Yous should now reboot and go into the BIOS configuration to kicking from USB. Instructions for doing and so vary wildly from arrangement to system, but generally entail the following:

Reboot the system.
While booting (earlier Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Hotkey instructions are by and large provided on the screen.
Go to the section that contains your boot devices.
With your USB drive plugged in, the USB drive should exist listed. If information technology isn�t, your system might not support booting from USB. Bold that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary boot device.
Exit from the BIOS configuration, saving all changes.

Delight notice that you can seriously spiral up your arrangement past providing incorrect BIOS settings!

Step three: Booting from rescue USB drive

Assuming that you properly configured your BIOS and your USB drive supports booting, your reckoner should at present boot from the the rescue USB drive. Depending on the speed of your USB drive, this may have a while.

If it isn�t working, then double-check the following before making a scene:

Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it accept height priority?)
Have you correctly prepared the USB drive in stride one? (Restart the process.)
Does your USB drive properly support being booted from? (Try another one!)

Pace 4: Prepping the Hard Disk

You need to make certain that your hard drive is partitioned and formatted properly. Especially if you've had Linux or some other operating system on it, you'll need to repartition and format information technology. The rescue drive contain file managing director and control line utility. You can launch DiskPart for disk partitioning and formatting from the control utility.

If you lot are sure that your hard drive is set up properly (i.e. it has only run Windows, it contains a valid Fat or NTFS partition) so you can rubber yourself the hassle and skip this stride.

Window XP doesn't support GPT partition. If your hard drive is partitioned in GPT way, you also need repartition and format the disc.

To repartition and format (This procedure volition destroy whatever data on the hard drive):

Click the icon on job bar to launch a command line Window.
Enter DiskPart to run the built-in deejay direction utility.
Enter the commands needed to repartition and format your drive. For example, try the following:

select disk 0 (select the first disk. On your calculator, disk 0 may not be the correct deejay, yous can utilize "list disk" to find the correct disk.)

make clean (purges the entire drive, substantially resetting it)

create partition primary (creates a single segmentation from the unabridged deejay)

select partition1 (select the partition created)

format fs=ntfs quick (format the partition to NTFS system, and practise a chop-chop format)

assign (assign the division a drive letter)

go out (quits DiskPart).

Step 5: Launching Windows XP Setup from USB drive

With your drive all ready, you tin at present launch the Windows XP setup with a few custom parameters. Allow's assume that the files are available at Eastward:\i386.

Plugging in a device now won�t work. Think that all USB devices volition need to be plugged in right from the get-go while using the rescue drive.

Run the following control:

Run E:\i386\winnt32.exe /syspart:C: /tempdrive:C: /makelocalsource. Replace C: with the drive yous desire to install Windows to.
Continue with the installation. If asked to convert the installation volume to NTFS, respond No. The setup programme incorrectly believes that your USB drive (if is formatted as Fat) needs conversion.

The setup plan will then silently close, which might brand you retrieve that something went wrong. Don't worry though.

Stride half dozen: Go on Windows XP Setup from Hard disk drive

Reboot your organization.
Unplug USB bulldoze during mail service stage.
Change your BIOS settings dorsum to kick from hd once again as needed.
You can now continue to finish setting upwardly Windows XP.

Annotation: The above guide works with Windows XP merely. For Windows 10, Windows 7, Windows 8 / 8.1, or Windows Vista operating systems, please refer to some other guide at http://www.poweriso.com/tutorials/how-to-make-win7-bootable-usb-drive.htm .

Source: https://www.poweriso.com/tutorials/how-to-make-winxp-bootable-usb-drive.htm

Posted by: wolfesaper1974.blogspot.com